⏱ 9 min read  ·  ✅ Updated Nov 2026

Flex ATX is the power supply format that makes very slim computers possible, and it is also the format that causes the most confusion at ordering time. A standard Flex ATX unit is a long, narrow brick for 1U rack cases, slim small form factor enclosures, network appliances, and compact Mini-ITX systems where a normal ATX or even an SFX supply cannot fit.

Our top pick: FSP FlexGuru Pro 500W. Runner-up: SilverStone FX350-G.

Two units can share the same dimensions and still behave very differently. One may provide two PCIe connectors for a graphics card, while another provides none and is intended only for a low-power server board. One may use fixed cables that fill a tiny case with unused leads, while another lets the builder connect only what is needed. This guide compares five genuine Flex ATX supplies, from a 500-watt Gold unit for a compact workstation to a modular 300-watt industrial unit for an always-on appliance. Measure the case first, count the connectors second, and only then compare wattage.

Quick Answer

As an Amazon Associate, we earn from qualifying purchases. For most compact builds, the FSP FlexGuru Pro 500W offers the strongest mix of wattage, Gold efficiency, and graphics card connectors. Builders with lower power needs should consider the SilverStone FX350-G or the Seasonic SSP-300SUG instead, depending on cabling preference.

How to Choose

Standard Flex ATX measures about 150 mm long, 81.5 mm wide, and 40.5 mm high, but confirm all three dimensions against the case specification rather than trusting the format name alone. Some units are slightly longer or use a different mounting pattern, and some slim desktops use proprietary supplies with different screw holes or AC inlet positions. Check the bracket as well: several units include a 1U or L-shaped bracket that decides whether the supply sits flush.

Next, estimate the real power requirement from the processor, graphics card, and drives, then leave headroom for transient loads. A low-power NAS or office system may run comfortably on 300 watts, while a system with a dedicated graphics card needs a careful look at the 12-volt rail and PCIe connectors. Modern hardware draws most power from the 12-volt output, so a single strong rail is easier to work with than a split rating that limits the card.

Connector inventory is where many purchases go wrong. Confirm the motherboard, CPU, PCIe, SATA, and peripheral counts before ordering. A unit without a PCIe connector can still be excellent for an integrated-graphics server, but it is the wrong choice for a gaming build unless the card draws all its power from the slot. Also check cable length, since a long fixed harness can block airflow in a very small enclosure.

Efficiency and cooling should be considered together. Gold-rated units generally waste less energy as heat, which helps in a chassis with limited airflow. Every unit here relies on a small 40mm fan, so fan placement, bearing type, and exhaust direction matter. Keep the intake and exhaust unblocked. Noise expectations should be realistic: a small fan cooling a loaded 500-watt supply will be audible in a quiet room, especially in a 1U case designed for a rack.

Fully modular designs keep the interior cleaner, yet the builder must confirm that the plugs fit within the available depth. For an always-on appliance, also look for active power factor correction, a wide input range, and protections against over-voltage, over-current, over-power, short circuit, and overheating.

FSP FlexGuru Pro 500W

The FSP FlexGuru Pro 500W is the most versatile starting point here for a builder who wants a Flex ATX supply that can handle a capable processor and a dedicated graphics card in a slim case. FSP includes both an L-shaped bracket and a 1U mounting bracket, broadening the enclosures it can serve, from small form factor desktops to industrial and NAS-style chassis.

The connector set is the main reason to choose it over lower-wattage alternatives: motherboard and CPU power plus two 6+2 pin PCIe connectors, giving a realistic path to a mid-range graphics card without adapters. Cabling is fixed, so route the harness clear of the fan path. The internal 40mm ball bearing fan suits an always-on system. This is the most balanced recommendation here for a compact workstation or 1U system.

Specs

    Item Detail
    Output 500 watts
    Efficiency 80 Plus Gold
    Form factor Flex ATX, 150 by 81.5 by 40.5 mm
    Input Full range, active power factor correction
    PCIe connectors Two 6+2 pin
    Cabling Fixed, direct output cables
    Fan 40mm, ball bearing
    Brackets 1U bracket and L bracket included

    SilverStone FX350-G

    The SilverStone FX350-G is a focused 350-watt option for builders who do not need the headroom of a 500-watt unit. It delivers 350 watts of continuous output, carries 80 Plus Gold certification, and uses a single 12-volt rail.

    Power delivery is aimed at integrated-graphics systems and modest dedicated cards. It provides a 6-pin PCIe connector rather than dual 6+2 pin connectors, so a card needing an 8-pin connector or two connectors belongs with a different supply. The compromises are clear: less wattage, fewer PCIe options, and no modularity. Within its class, the FX350-G is a tidy, efficient choice where heat and noise matter more than expansion room.

    Specs

      Item Detail
      Output 350 watts
      Efficiency 80 Plus Gold
      Form factor Flex ATX, 150 by 81.5 by 40.5 mm
      12-volt rail Single rail
      PCIe connectors One 6-pin
      Cabling Fixed
      Fan 40mm
      Protections Over power, over voltage, short circuit

      Seasonic SSP-300SUG

      The Seasonic SSP-300SUG is an industrial-grade 300-watt Flex ATX supply for low-power systems where efficiency and compact size matter more than graphics card support. The housing follows the standard dimensions, and Seasonic describes it as compliant with Flex ATX version 1.0 as well as ATX 12V and EPS 12V requirements, making it a fit for 1U servers, network appliances, and slim desktops using integrated graphics.

      Its cabling differs from a conventional modular supply: a shared, removable harness centred on the main motherboard connection reduces fixed leads, but the builder should study its layout before committing. Check that it covers the board, processor, and storage planned, and do not assume a PCIe connector is present: this unit provides none. Cooling comes from a 40mm double ball bearing exhaust fan, suiting long service intervals. Choose it for an always-on system with modest hardware, not for gaming.

      Specs

        Item Detail
        Output 300 watts
        Efficiency 80 Plus Gold
        Form factor Flex ATX, 150 by 81.5 by 40.5 mm
        12-volt rail Single rail, 25 amps
        PCIe connectors None
        Cabling Modular harness design
        Fan 40mm, double ball bearing
        Input Wide range, active power factor correction

        Apevia ITX-PFC500W

        The Apevia ITX-PFC500W addresses a specific problem in small builds: fixed cables taking up space the system does not have. Because the cables detach, the builder can install only the leads the system uses, leaving the rest out of the chassis and reducing obstruction around the vents.

        The listed protections cover over-voltage, overload, over-current, overheating, and short circuit faults. Pay close attention to the physical specification on the current listing, because this unit uses its own compact dimensions rather than the exact standard footprint of the FSP and SilverStone models. Measure the mounting space and the depth available for modular plugs before ordering, since a modular connector adds depth at the cable exit. Efficiency certification is not the headline here, so builders who place Gold efficiency first should compare carefully with the Gold-rated alternatives. Its appeal is 500-watt capacity plus modular cabling in a small 1U-style housing, provided the case dimensions match. Use only the cables supplied for this model.

        Specs

          Item Detail
          Output 500 watts
          Efficiency Not Gold certified in listing
          Form factor Mini-ITX, Flex ATX, 1U style
          Input Full range, active power factor correction
          Cabling Fully modular
          Protections Over-voltage, overload, over-current, overheating, short circuit
          Intended use POS, all-in-one, server, small form factor
          Fit note Confirm listed dimensions before ordering

          FSP FSP400-60FGGBA

          The FSP FSP400-60FGGBA is a long-established 400-watt Flex ATX supply sitting between the 300-watt industrial units and the 500-watt models in both capacity and intent. FSP presents it as a Mini-ITX solution with more headroom than a basic 300-watt replacement. For a compact desktop with a mainstream processor and a modest graphics card, 400 watts is often the practical middle ground.

          Check the connector configuration on the specific listing, because versions of industrial supplies can vary by channel. The version commonly sold for Mini-ITX builds includes motherboard, CPU, graphics card, and storage connections for a small workstation, but confirm the exact PCIe arrangement against the card being installed. Plan the route for unused leads so they do not block the narrow airflow path. This model suits a builder who wants Gold efficiency and a standard footprint, needs more than 350 watts, but does not need the dual PCIe provision of the FlexGuru Pro 500W.

          Specs

            Item Detail
            Output 400 watts
            Efficiency 80 Plus Gold
            Form factor Flex ATX, 150 by 81.5 by 40.5 mm
            Model FSP400-60FGGBA
            Input Active power factor correction
            Cabling Fixed
            Intended use Mini-ITX and slim small form factor
            Fit note Confirm connector set on listing

            Who Should Skip It

            Skip Flex ATX entirely if the case accepts SFX or ATX supplies, which offer quieter fans, wider choice, higher wattages, and easier cable management. Builders planning a high-end graphics card or multiple expansion cards should also look elsewhere, because even the strongest units here are limited by a 40.5 mm tall housing and a small exhaust fan.

            Skip this format if noise is the top priority at a desk: a 1U supply is designed first for racks, and its small fan will be more noticeable than a larger SFX or ATX fan. Skip it, too, if the supply in a slim prebuilt desktop is proprietary, since non-standard wiring makes a retail unit unsafe until the pinout and mounting are confirmed. Finally, skip any model whose connector set does not match the hardware.

            FAQ

            Is Flex ATX the same as SFX or TFX?

            No. Flex ATX is longer, narrower, and shorter than SFX, at about 150 by 81.5 by 40.5 mm, and it is built mainly for 1U and slim enclosures. TFX is a different slim format with its own dimensions. Always match the format named in the case specification.

            How much wattage does a small form factor build need?

            That depends mainly on the graphics card. An integrated-graphics office, server, or NAS system can fit in the 300-watt class, while a build with a dedicated card needs the card requirement checked against both total wattage and the 12-volt rail.

            Can a Flex ATX supply power a dedicated graphics card?

            Yes, when the supply provides the PCIe connector the card requires and enough 12-volt capacity for the whole system. The FSP FlexGuru Pro 500W provides two 6+2 pin connectors, the SilverStone FX350-G provides a single 6-pin connector, and the Seasonic SSP-300SUG provides none.

            Why are Flex ATX supplies louder than larger supplies?

            The format leaves room only for a small 40mm fan, which must spin faster than a large fan to move comparable air, and heat is concentrated in a narrow housing. Keeping the vents clear and choosing an efficient unit help, but near-silent desk use calls for a case that accepts a larger format.

            Final Verdict

            The FSP FlexGuru Pro 500W is the default recommendation for a build needing real graphics card capability and Gold efficiency. The SilverStone FX350-G suits a modest system within 350 watts, while the Seasonic SSP-300SUG serves low-power, always-on systems needing no PCIe power. The Apevia ITX-PFC500W is the choice when modular cabling decides it, subject to a dimension check, and the FSP FSP400-60FGGBA remains a sound middle option. In every case, the order is fit, connectors, rail capacity, then wattage.

            Product and ASIN Reference

            Product ASIN
            FSP FlexGuru Pro 500W B08BF1H5R1
            SilverStone FX350-G B07CK72QK8
            Seasonic SSP-300SUG B017XEIJDK
            Apevia ITX-PFC500W B0CWN59YCZ
            FSP FSP400-60FGGBA B014G2OUG2

            Explore Our Guides & Free Tools