The best GPU fan replacement kit for an RTX card is the one that matches your exact cooler, and for owners of EVGA RTX 3070, 3080 and 3090 FTW3 cards the three-fan PLD09220S12H set is the most useful starting point. A “replacement kit” here means a matched set of axial fans that swap into an existing heatsink shroud, so the right pick depends on fan diameter, connector type and the card model printed on the listing, not on brand names. This guide ranks six listed options by who each suits, and it flags every spot where a part number or compatibility claim needs a double check before you order.
If your card is a compact ASUS Phoenix or an MSI Gaming-series 95mm design, jump to the decision table below, because those fans are a different size from the 87mm FTW3 parts.
Quick List
- 95mm Phoenix fan (T129215SU) – best for ASUS Phoenix RTX 3050 and 3060 mini cards
- 87mm PLD09220S12H three-fan set – best for EVGA RTX 3070, 3080, 3080 Ti and 3090 FTW3 owners who want every fan renewed at once
- YIBEICO three-piece fan set – best for EVGA RTX 3070, 3070 Ti, 3080 and 3080 Ti XC3 owners, after confirming fan size
- inRobert FTW3 Ultra full set – best for a complete-set swap on FTW3 Ultra cards
- PLD10010S12HH 95mm four-pin fan – best for MSI RTX 3050, 3060 and 3060 Ti Gaming cards
- RAKSTORE PLD09220S12H fan – best for a quiet-focused FTW3 Ultra refresh
Which One Is Right for You?
| If you… | Choose |
|---|---|
| own an MSI RTX 3050, 3060 or 3060 Ti Gaming card with 95mm fans | PLD10010S12HH 95mm four-pin fan |
| have a small ASUS Phoenix RTX 3050 or 3060 and need a single 95mm replacement | 95mm Phoenix fan (T129215SU) |
| want every fan on an EVGA FTW3 renewed in one purchase | 87mm PLD09220S12H three-fan set |
| run an EVGA FTW3 Ultra and prefer a listing that advertises a full set | inRobert FTW3 Ultra full set |
| run an EVGA XC3 and a fan listing explicitly names XC3 models | YIBEICO three-piece fan set |
| want an FTW3 Ultra part with a quiet-cooler description | RAKSTORE PLD09220S12H fan |
Start with the label on your own fan, not on the card box. The part number printed on the fan hub or its sticker is the single most reliable match. If that number is not in a listing title, treat the listing as a guess and measure the blade diameter and mounting-hole spacing instead.
All 6 Picks in Detail
1. 95mm Phoenix Fan (T129215SU) – Best for ASUS Phoenix RTX 3050 and 3060
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
This listing is aimed at owners of the compact, single-fan ASUS Phoenix RTX 3050 and 3060 cards, the kind that go into small-form-factor and ITX builds. The title names the part numbers T129215SU and CF1010U12D, a 95mm diameter and a six-pin connector, which is unusual compared with the four-pin plugs on most larger cards. Because the connector is specific to this family, it should only be ordered for the Phoenix cards named in the listing.
- Diameter: 95mm, per the listing title
- Connector: six-pin, per the listing title
- Part numbers named: T129215SU and CF1010U12D
- Stated fit: ASUS Phoenix RTX 3050 and RTX 3060 mini cards
- Quantity and screws: confirm on the listing
Pros:
- Targets a niche card that few generic fan sets cover
- Part numbers are stated, which makes cross-checking easy
Cons:
- Useful only for the named Phoenix cards
- A six-pin plug leaves no room for guessing; a mismatch means a return
Compared with the MSI-oriented 95mm fan in this list, it shares a diameter but not a connector style, so the two are not interchangeable. Small-form-factor cards run their single fan hard because the heatsink is short, so this is a part worth replacing promptly when it starts to rattle, and worth cleaning dust from before you fit the new one.
2. 87mm PLD09220S12H Three-Fan Set – Best for EVGA FTW3 Owners
The listing title names the 87mm PLD09220S12H fan and a three-fan quantity, with fit stated for EVGA GeForce RTX 3070, 3080, 3080 Ti and 3090 FTW3 coolers. For a triple-fan card, buying all three at once keeps bearing wear and noise character even across the cooler, which is the main argument for a set instead of one fan. Third-party sellers of this part number commonly describe a 12V, four-pin fan, though the exact amperage varies between listings, so confirm it on the product page.
- Fan part number: PLD09220S12H
- Diameter: 87mm, per the listing title
- Quantity: three fans, per the listing title
- Stated fit: EVGA RTX 3070, 3080, 3080 Ti, 3090 FTW3
- Color: black, per the listing title
- Connector and screws: confirm on the listing
Pros:
- One purchase covers a whole triple-fan card
- Part number makes matching to the old fan straightforward
Cons:
- Third-party part, not an original equipment spare
- Left, middle and right fans on some cards use different plug positions, so check orientation
Next to the inRobert and RAKSTORE listings it is the plainest statement of “three fans for FTW3,” and the main reason to pick a neighbor is the seller rather than the spec.
3. YIBEICO Three-Piece Fan Set – Best for EVGA XC3 Owners (Confirm First)
This listing is written for EVGA RTX 3070, 3070 Ti, 3080 and 3080 Ti XC3 cards and says the fans are compatible with the PLD09220S12H cooler fan. That wording deserves care. Other sellers of the same part number advise that it fits FTW3 boards and not XC3 boards, which means the compatibility claim is disputed across listings. Before buying, pull the shroud on your own card, read the fan label and measure the blades; if the number reads PLD09220S12H and the diameter is about 87mm, the set is a sensible match.
- Quantity: three pieces, per the listing title
- Stated fit: EVGA RTX 3070, 3070 Ti, 3080, 3080 Ti XC3
- Referenced part: PLD09220S12H
- Diameter and connector: confirm on the listing
- Included hardware: confirm on the listing
Pros:
- One of the few listings that names XC3 models directly
- Three pieces cover the full cooler
Cons:
- Compatibility wording conflicts with other sellers of the same part number
- Requires verification against the label on the existing fan
It is the riskiest fit in the list if you own an XC3, and the safest alternative is simply to verify the label first and treat the FTW3 sets as a match only if the numbers agree.
4. inRobert FTW3 Ultra Full Set – Best for a Complete FTW3 Ultra Swap
The listing calls this a “Fan-Full Set” for the EVGA RTX 3070, 3080 Ti and 3090 FTW3 Ultra family and names the PLD09220S12H part. The word “full set” suggests every fan the cooler needs is included, but the title does not give a count, so verify that against the product page and the number of fans on your card. This is the choice for someone who wants the whole cooler refreshed without hunting for individual left, middle and right positions.
- Part number: PLD09220S12H
- Stated fit: EVGA RTX 3070, 3080 Ti, 3090 FTW3 Ultra
- Set description: full set, per the listing title
- Fan count, diameter and connector: confirm on the listing
Pros:
- Full-set wording simplifies a triple-fan swap
- Clear model coverage for the Ultra variants
Cons:
- Fan count is not stated in the title
- Third-party seller; keep the original fans until the new ones are confirmed working
Against the 87mm three-fan set, it covers almost the same ground, so choose on how clearly each listing describes the contents. Since the part number is shared by the three FTW3-oriented sets, any of them should in principle interchange; what differs is how much the seller tells you about quantity, plug and hardware, and that is where a careful read pays off.
5. PLD10010S12HH 95mm Four-Pin Fan – Best for MSI RTX 3050, 3060 and 3060 Ti Gaming
This is the only listing in the group built around MSI cards. The title states a 95mm diameter, 12V and 0.40A ratings and a four-pin connector, with fit for MSI RTX 3050, 3060 and 3060 Ti Gaming cards plus Radeon RX 6600 XT and 6700 XT Gaming boards. The four-pin connector normally means PWM speed control, so the card can keep varying fan speed with temperature. Be careful with older MSI cards, because some earlier fans of the same family use a six-pin plug, and that is a different part.
- Fan part number: PLD10010S12HH
- Diameter: 95mm
- Rating: 12V, 0.40A, per the listing title
- Connector: four-pin
- Stated fit: MSI RTX 3050, 3060, 3060 Ti Gaming; RX 6600 XT, 6700 XT Gaming
- Quantity: confirm on the listing
Pros:
- Electrical rating is stated plainly in the title
- Covers several current-generation MSI cooler designs
Cons:
- Unit count is unclear, so one fan may not be a full set
- Left and right fans can differ in orientation or connector
Compared with the Phoenix fan, it has the same diameter but a four-pin plug and a broader set of supported boards. Because the same cooler family appears across both GeForce and Radeon cards, the model list is long, which makes checking the old fan’s label even more important here than on the single-family listings.
6. RAKSTORE PLD09220S12H – Best for a Quiet FTW3 Ultra Refresh
RAKSTORE offers the same PLD09220S12H part, with fit stated for EVGA RTX 3070, 3080, 3080 Ti, 3090 and 3090 Ti FTW3 Ultra cards and the word “Quiet” in the title. Treat the noise wording as a marketing description rather than a measured figure; fan noise depends more on bearing condition, dust, and the speed curve in the card firmware than on the label. Its widest model list, which reaches the 3090 Ti, is the main practical difference from its neighbors.
- Fan part number: PLD09220S12H
- Stated fit: EVGA RTX 3070, 3080, 3080 Ti, 3090, 3090 Ti FTW3 Ultra
- Description: quiet cooler fan, per the listing title
- Quantity, diameter, connector: confirm on the listing
Pros:
- Broadest EVGA model list in the group
- Same part number as the other FTW3 options, so it is easy to compare
Cons:
- Quantity is not stated in the title
- Noise claim cannot be checked from the listing
It sits closest to the inRobert set, and the decision comes down to which listing gives you the clearer contents list. If you want the widest model coverage, including the 3090 Ti, this is the one whose title lists it, but you should still match the label on your old fan before relying on any list.
Specs Compared
| Option | Part number | Diameter | Connector | Stated card fit | Quantity |
|---|---|---|---|---|---|
| 95mm Phoenix fan | T129215SU / CF1010U12D | 95mm | 6-pin | ASUS Phoenix RTX 3050, 3060 | Confirm on listing |
| 87mm three-fan set | PLD09220S12H | 87mm | Confirm on listing | EVGA RTX 3070, 3080, 3080 Ti, 3090 FTW3 | 3 fans |
| YIBEICO set | Refers to PLD09220S12H | Confirm on listing | Confirm on listing | EVGA RTX 3070, 3070 Ti, 3080, 3080 Ti XC3 | 3 pieces |
| inRobert full set | PLD09220S12H | Confirm on listing | Confirm on listing | EVGA RTX 3070, 3080 Ti, 3090 FTW3 Ultra | Full set (count: confirm) |
| PLD10010S12HH fan | PLD10010S12HH | 95mm | 4-pin, 12V 0.40A | MSI RTX 3050, 3060, 3060 Ti Gaming; RX 6600 XT, 6700 XT | Confirm on listing |
| RAKSTORE fan | PLD09220S12H | Confirm on listing | Confirm on listing | EVGA RTX 3070, 3080, 3080 Ti, 3090, 3090 Ti FTW3 Ultra | Confirm on listing |
How We Chose These
We built this list from research, not from bench work. For each product we read the full listing title, compared the part numbers, diameters and connector types it states, and cross-checked those claims against how fan replacement parts are described across seller and parts-retailer pages. We favored listings that name a fan part number and a specific card family, because a stated part number can be verified against the label on your existing fan. Where a listing leaves out the quantity, connector or included hardware, we say so and ask you to confirm it on the product page. This is a specification-based comparison, so we make no noise, airflow or lifespan claims.
What to Look For
Match the part number, not the card name
Graphics card makers often change fans between revisions of the same model, so a card name alone is not a reliable key. The fan hub or sticker carries a part number such as PLD09220S12H or PLD10010S12HH. Match that string, then check diameter and the mounting-hole spacing. A fan that is only 2 or 3mm off in diameter can foul the shroud or sit too far from the heat fins.
Connector and wiring
Three connector styles show up on these cards: a four-pin plug with PWM control, a six-pin plug that bundles more than one fan or header, and a two-pin or three-pin plug on older designs. A four-pin PWM fan lets the card’s firmware vary fan speed, while a different plug count means the replacement may not communicate with the card at all. Look at the plug on your existing fan, count the pins and compare the wire colors and the shape of the housing. Never force a connector that does not seat easily.
Left, middle and right positions
On triple-fan boards the three fans are not always identical. Some are wired as left, middle and right units with different cable lengths or plug positions, and the middle fan may spin in the opposite direction to reduce turbulence. A “set” listing usually handles this for you; a single-fan listing may not. If you are replacing one fan, photograph the cooler before disassembly so you know where each plug goes.
Safety and warranty
Power the PC off, unplug it from the wall and press the power button to drain residual charge. Wear an anti-static wrist strap or touch bare metal on the case before you handle the card. Removing the shroud usually voids the warranty on some cards, so read the manufacturer terms first; many brands expect you to use the factory service route while the card is covered. Never spin a fan by blowing compressed air at it, because it can overspeed a bearing, and never run a card under load with a fan disconnected.
Worked example
Suppose a FTW3 card shows a fan error and one fan rattles. Remove the shroud, read the label on the damaged fan, and if it says PLD09220S12H, measure the blade at roughly 87mm. A set of three covers all positions, so you swap all three at once and keep the old working fans as spares. If the label shows a different number, stop and look for a fan set that states that exact part number.
Installation checks after the swap
Once the new fans are mounted, reassemble the shroud, refit the card and boot into the operating system before closing the case. Open a monitoring utility and confirm that every fan reports a speed above zero once the GPU passes the temperature where its fans normally start, which is often around 50 to 60 degrees Celsius on zero-RPM designs. Run a short game or stress scene and listen for ticking, which usually points to a blade touching the shroud or a cable resting in the fan path. Tuck every wire clear of the blades with a small cable tie, and recheck after the first day of use because new fans can settle slightly in their mounts.
Reading a seller’s compatibility list
Sellers often paste a long list of card models into the title, and the list can be broader than the real fit. Treat it as a starting point. Compare at least three details with your old fan: the part number, the diameter and the plug. If two of the three agree and the third is unclear, ask the seller or choose a listing that states all three. A fan that arrives and does not fit is a hassle, but a fan that fits mechanically and has the wrong plug can tempt people into forcing it, which is the real risk.
When a fan swap is the wrong fix
A noisy card is not always a failing fan. Dust-clogged fins, dried thermal paste or worn thermal pads can raise temperatures and push fans to high speed. Clean the heatsink with a soft brush, check the fan with a gentle finger spin for grit, and only replace the fans if the bearing feels rough or a blade is cracked.
Questions
Will a fan with the same size always work?
No. Diameter is only one of several factors, and mounting spacing, plug type, pin count and fan thickness also have to match. The safest check is the part number on the old fan.
Can I replace only one fan on a triple-fan card?
Yes, if the fans are the same part and the plug matches, but replacing all three keeps wear and noise uniform. If you buy a single fan, make sure it matches the left, middle or right position of the one you are removing.
Do I need to reapply thermal paste during a fan swap?
Often not, since the fans sit on the shroud and do not touch the GPU die. However, if the heatsink comes off the board, you should clean the old paste and apply fresh paste and check the pad condition.
Why is my new fan not spinning?
Check that the plug is fully seated and that the cable is in the right header, then confirm the card is receiving full power. Many RTX cards keep fans off at low temperature, so confirm the fan starts once the GPU warms up.
Is a third-party fan as good as the original?
It depends on the build quality of the specific part, which a listing cannot prove. Treat third-party fans as a repair option, check them carefully after installation and keep the original fans in case you need to revert.
How long should a replacement GPU fan last?
Fan life depends on bearing type, dust, operating temperature and how many hours the card runs at high speed, and listings rarely publish a rated life. A fan that is kept clean and runs at moderate speed generally lasts much longer than one that spins at full tilt in a dusty case. Set a sensible fan curve and clean the heatsink every six months or so.
Update History
- October 20, 2026 – Initial publication; product set drawn from current catalog listings.
- Check the product page for current specifications and availability before buying.
Sources
- Retailer listing titles and specification fields for each of the six fans
- Seller descriptions of the PLD09220S12H and PLD10010S12HH fan part numbers, including noted compatibility differences between FTW3 and XC3 coolers
- Parts-retailer pages that list fan dimensions and card compatibility for EVGA and MSI cooler families
Write Your Review
No reviews yet. Be the first to share your experience!