⏱ 9 min read  ·  ✅ Updated Nov 2026

A dummy plug is a small display emulator that sits in a spare HDMI or DisplayPort output and feeds the graphics card a fixed EDID, so the operating system behaves as if a real monitor were attached. That single trick keeps remote desktop sessions at full resolution, stops a headless PC from falling back to a tiny default desktop, and keeps GPU workloads such as mining, rendering and game streaming running at the resolution you set. The strongest all-round pick here is the EVanlak 8K HDMI Dummy Plug, the only model in this group with an HDMI 2.1 interface and published support for 4K at 120Hz and 8K at 30Hz. For a simple 4K at 60Hz virtual display on a tighter budget, the long-running FUERAN 4K HDR plug covers the same job with a fixed EDID and no configuration at all.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

How These Dummy Plugs Were Compared

Every model in this roundup is a passive plug with a male connector on one end and no cable at all. None of them needs drivers, software or external power, because each one draws what it needs from the video port and presents a stored EDID to the graphics card. The comparison below is built only from published listing data: the connector type, the highest emulated resolution and refresh rate printed in the listing, the pack count, and any limits the maker prints about graphics hardware or port versions.

Three things separate these plugs in practice. The first is the interface generation, because an HDMI 2.1 plug can publish much higher refresh rates at 4K than an HDMI 2.0 era design. The second is the fixed EDID itself: some plugs top out at 1920×1080, others publish a ladder of modes up to 4096×2160 or beyond, and the graphics card can never select a mode the EDID does not offer. The third is pack count, which matters when a mining rig or a rack of small PCs needs one plug per machine. Where a listing headline figure and the listing specification table disagree, the specification figure is the one used in this article.

Product Connector Max emulated resolution Pack count Tier
EVanlak 8K HDMI Dummy Plug HDMI 2.1 7680×4320 at 30Hz 1 Premium
Woieyeks 4K 120Hz Dummy Plug HDMI 2.1 3840×2160 at 120Hz 1 Mid-range
FUERAN 4K HDR Dummy Plug HDMI 4096×2160 at 60Hz 1 Budget
DTECH 4K HDMI Dummy Plug HDMI 4096×2160 at 60Hz 1 Mid-range
Malarpon HDMI Dummy Plug HDMI 1920×1080 at 60Hz 1 Budget

EVanlak 8K HDMI Dummy Plug

EVanlak builds a wide range of headless ghost adapters, and this HDMI 2.1 model is the highest specified plug in the group. The listing publishes an emulated ceiling of 8K at 30Hz, with 4K at 120Hz, 1440p at 144Hz and 1080p at 144Hz below it. That mode ladder makes it the natural pick for a headless gaming or streaming host, where the virtual display needs to match a high refresh client, and for newer mining and rendering rigs built around current generation cards with HDMI 2.1 outputs.

The plug is a single gold-plated dongle with no cable, so it adds almost no depth behind a case or inside a rack. Like every model here it is plug and play: the EDID is fixed at the factory, the operating system sees a monitor the moment the machine boots, and remote tools such as Parsec, Moonlight or a plain remote desktop session can then run at any resolution the EDID publishes. Buyers who only need 1080p or 4K at 60Hz can spend less further down this list, but nothing else here matches this ceiling.

Specs

  • Connector type: HDMI male, HDMI 2.1
  • Max emulated resolution: 7680×4320 (8K) at 30Hz
  • Published refresh rates: 3840×2160 at 120Hz, 2560×1440 at 144Hz, 1920×1080 at 144Hz
  • Pack count: 1
  • EDID notes: Fixed factory EDID, plug and play, gold-plated connector, no drivers or external power

Woieyeks 4K 120Hz HDMI 2.1 Dummy Plug

The Woieyeks plug is aimed squarely at high refresh headless use. Its listing publishes 3840×2160 at 120Hz as the top mode, with 2560×1440 at 120Hz and 1920×1080 at 120Hz underneath, and it states plainly that 8K output is not supported. For a game streaming host or a remote workstation that lives at 4K or 1440p, that mode set covers the resolutions most people actually select.

The maker prints two conditions worth knowing before you buy. Reaching 4K at 120Hz requires a graphics card port that supports HDMI 2.1, and the listing notes that 4K resolution simulation calls for an HDMI 2.0 or faster port and a discrete graphics card rather than integrated graphics. Those limits come from the port and the GPU, not the plug, but they decide whether the top mode appears in your display settings at all. Within those conditions, the plug is a single dongle with a fixed EDID and the usual driver-free setup.

Specs

  • Connector type: HDMI male, HDMI 2.1
  • Max emulated resolution: 3840×2160 at 120Hz
  • Published refresh rates: 2560×1440 at 120Hz, 1920×1080 at 120Hz
  • Pack count: 1
  • EDID notes: Fixed EDID, 8K not supported, 4K modes call for a discrete GPU per the listing, 4K at 120Hz needs an HDMI 2.1 port

FUERAN 4K HDR HDMI Dummy Plug

FUERAN has sold headless display emulators since 2017, and this 4K HDR model, part number FUERAN-010, is the budget anchor of the group. The listing publishes support for 4096×2160 at 60Hz, 3840×2160 at 60Hz and 2560×1440 at 60Hz, plus HDR, which is a generous mode ladder for a plug at this tier. It works with Windows, Mac and Linux hosts, and the brand sells matching DisplayPort, DVI and VGA emulators for rigs with mixed outputs.

This is the plug to pick when the goal is a dependable 4K at 60Hz virtual monitor for remote access, a media server or a mining rig that never needs high refresh rates. The EDID is fixed, there is nothing to configure, and the low draw means it can sit in a port for years without attention. It cannot follow the HDMI 2.1 models to 120Hz at 4K, so streaming hosts that want high refresh should look at the EVanlak or Woieyeks instead.

Specs

  • Connector type: HDMI male
  • Max emulated resolution: 4096×2160 at 60Hz
  • Published refresh rates: 3840×2160 at 60Hz, 2560×1440 at 60Hz
  • Pack count: 1
  • EDID notes: Fixed EDID with HDR support, plug and play, model FUERAN-010, Windows, Mac and Linux

DTECH 4K HDMI Dummy Plug

DTECH packages its 4K emulator as the fit-Headless line, and this single pack version, model T0667-1, publishes a maximum emulated resolution of 4096×2160 at 60Hz with 3840×2160 and 1080p modes below it. The connector is gold plated, the body is compact, and the listing confirms compatibility with Windows, Mac OSX and Linux, which suits mixed racks of small PCs and older workstations.

One useful detail is that DTECH sells the same emulator in one, two, three and five packs under separate listings, so a mining operation or a support desk that needs a plug in every machine can standardise on a single model. This article covers the one pack listing. DTECH also prints the standard warning for this category: a dummy plug cannot emulate a resolution higher than the computer itself supports, so the GPU and its driver set the real ceiling.

Specs

  • Connector type: HDMI male, gold-plated
  • Max emulated resolution: 4096×2160 at 60Hz
  • Published refresh rates: 3840×2160 at 60Hz, 1920×1080 at 60Hz and below
  • Pack count: 1 (two, three and five packs sold under separate listings)
  • EDID notes: Fixed EDID, no drivers or power supply, Windows, Mac OSX and Linux, model T0667-1

Malarpon HDMI Dummy Plug

The Malarpon plug, model MAL-DP-101, is the simplest device in this roundup. It emulates a single class of display at 1920×1080 at 60Hz, which is exactly what a headless media server, a racked Mac mini or a small Linux box needs for smooth remote access at a standard desktop size. The listing describes a copper build, DDC EDID signalling and support for Windows, Mac OSX and Linux.

A fixed 1080p ceiling is a limitation if you plan to raise the virtual desktop later, and this plug offers no 4K mode at all. In exchange, it avoids the most common mismatch in this category, where a plug publishes modes the remote software or the GPU cannot use cleanly. For a single-purpose headless machine that will live at 1080p, this budget pick does the whole job.

Specs

  • Connector type: HDMI male
  • Max emulated resolution: 1920×1080 at 60Hz
  • Published refresh rates: 60Hz at 1920×1080
  • Pack count: 1
  • EDID notes: DDC EDID emulation, model MAL-DP-101, copper material per the listing, Windows, Mac OSX and Linux

How to Choose a Dummy Plug

Match the plug to the highest resolution and refresh rate you will actually select in the operating system. A remote desktop or media server workload is well served by any 4K at 60Hz model here, while a game streaming host that feeds a 120Hz client needs one of the two HDMI 2.1 plugs, because no HDMI 2.0 era EDID publishes 4K at 120Hz. Buying more plug than the port supports gains nothing, since the graphics card can only choose modes that both the EDID and the port allow.

Check the connector before anything else. Most GPUs offer one HDMI output and several DisplayPort outputs, so a multi-card mining rig may need DisplayPort emulators for most cards and an HDMI plug for only one. Confirm the pack count as well: every listing in this roundup is a single plug, and rigs with several headless machines need either several singles or a multi-pack listing from the same maker.

Finally, read the printed GPU conditions. Some listings limit their 4K modes to discrete graphics cards, and high refresh modes depend on the port generation. If the host uses integrated graphics, a 1080p or 4K at 60Hz plug is the safer match. No model here needs power, drivers or configuration, so the whole decision rests on connector, mode ladder and count.

FAQ

What does an HDMI dummy plug do on a headless PC?

It presents a fixed EDID to the graphics card, so the computer detects a connected monitor even when no display is attached. That keeps the desktop at a usable resolution, lets remote access tools draw a full screen, and allows GPU workloads to keep running at the selected mode instead of dropping to a minimal fallback display.

Can a dummy plug emulate a 4K display at 120Hz?

Yes, if the plug is an HDMI 2.1 model with that mode in its published EDID, such as the EVanlak and Woieyeks plugs in this roundup. The graphics card also needs an HDMI 2.1 output, because the port generation limits which of the published modes the operating system can select.

Do dummy plugs work with integrated graphics?

Most do at standard resolutions, and every plug here is driver-free and operating system independent. Some makers print limits for their highest modes, though: the Woieyeks listing, for example, ties its 4K simulation to a discrete graphics card. Check the listing conditions for the exact model before relying on a 4K mode from an integrated GPU.

How many dummy plugs does a multi-GPU mining rig need?

One plug per graphics card that has no real display attached, matched to the output you use on each card. Cards with DisplayPort outputs need DisplayPort emulators rather than HDMI plugs, so count the free ports by type across the rig before ordering singles or a multi-pack.

Conclusion

For most headless PCs, the FUERAN 4K HDR and DTECH 4K plugs deliver a stable 4K at 60Hz virtual display at a budget tier, and the Malarpon covers pure 1080p remote access for even less outlay per machine. Step up to the Woieyeks if the virtual display must run at 120Hz, and choose the EVanlak 8K if you want the widest published mode ladder, including 8K at 30Hz and 1440p at 144Hz, from a single HDMI 2.1 dongle. Whichever model fits, the deciding figures are the connector type and the modes printed in the EDID, not the size of the box it ships in.

Explore Our Guides & Free Tools